[gbassrace]

Great! Yup, I am an Amsoil or Redline user.

 

[FU3LD]

I'll be fitting the Mountune UK V2 plate, and what a surprise they do not have a guide.

I know I'm asking a question to an older response on an older thread. Where were you able to get/order the UK v2 breather plate? I really like the design and baffle system it has.

Just to confirm you're talking about this one, right?

Image for quick reference:

 

[nicklulu]

I know I'm asking a question to an older response on an older thread. Where were you able to get/order the UK v2 breather plate? I really like the design and baffle system it has.

Just to confirm you're talking about this one, right?

Image for quick reference:

Yep, that's the one.

I got mine from another member last year, almost placed the order a day before.

 

[FU3LD]

Yep, that's the one.

I got mine from another member last year, almost placed the order a day before.

do you recall were you going to place the order at? Mountune site wont ship to the US, MountuneUSA doesn't have it, and I'm not having luck finding it online anywhere.

 

[nicklulu]

do you recall were you going to place the order at? Mountune site wont ship to the US, MountuneUSA doesn't have it, and I'm not having luck finding it online anywhere.

I was gonna to place it with Mountune UK, at that time they were still shipping to the States.

I placed my last Mountune UK order earlier this year when I ordered my wheels with them, still have around £200 in gift certs.

They do have some resellers or use a forwarding company.

 

[MbbRS]

do you recall were you going to place the order at? Mountune site wont ship to the US, MountuneUSA doesn't have it, and I'm not having luck finding it online anywhere.

https://j-w-racing.co.uk/

 

[Si2RS]

https://j-w-racing.co.uk/

+1 for JW Racing. Got my Mountune UK SS brake lines from them a few weeks ago.

 

[FU3LD]

thanks everyone! I'll be placing my order shortly.

 

[FU3LD]

Yep, that's the one.

I got mine from another member last year, almost placed the order a day before.

View attachment 355013

what are you going to do in regards to the stock PCV valve? Did the mountune plate come with an uprated one? (i havent purchased yet, bought an accessport of the forum instead, lol.)

 

[nicklulu]

what are you going to do in regards to the stock PCV valve? Did the mountune plate come with an uprated one? (i havent purchased yet, bought an accessport of the forum instead, lol.)

Keeping it, I am not too concern about it. I did read several posts about it. the Mountune V2 plate and the 2 oil catch cans should be more than enough.

The Mountune V.2 breather plate does not come with a PCV valve, but the positioning of it going upwards rather than on its sides I think its better.

 

[turbojr74]

The Mountune V.2 breather plate does not come with a PCV valve, but the positioning of it going upwards rather than on its sides I think its better.

The Radium came with a better one than stock - however I hadn't heard the Focus (haha - see what I did there?) on position. Mind you the Radium one is just straight out and not 90 degree like the OEM.

Interested @nicklulu on what got you to that conclusion. Pressure on the PCV itself and how it sits in the plate?

 

[nicklulu]

The Radium came with a better one than stock - however I hadn't heard the Focus (haha - see what I did there?) on position. Mind you the Radium one is just straight out and not 90 degree like the OEM.

Interested @nicklulu on what got you to that conclusion. Pressure on the PCV itself and how it sits in the plate?

How the "labyrinth" is designed on the V2:

If I was connecting to the sides I would use a different PCV vavle as it would bypass the "labyrinth" baffle.

The connection of the PCV valve on the top with the "labyrinth" baffle with the cover will help I think.

The V1 and the Radium uses a open baffle type:

Stock Breather Plate More Effective Than Aftermarket?

I've been searching for the cause of blowby that has caused a ton of oil in my intake manifold. About 8-10k miles ago I installed a Mountune breather plate and Radium catch can and the intake/charge piping only had a little bit of film on it. I narrowed it down to something that had to be in...

www.focusrs.org

 

[turbojr74]

How the "labyrinth" is designed on the V2:

Clearly missed that one. That's what I get for buying and then not looking back.

That baffle labyrinth is intense!! David Bowie might be the cause

 

[Ankah]

Not available in the USA that's just yet another thing that Europe gets the US is f***** over on

Clearly missed that one. That's what I get for buying and then not looking back.

That baffle labyrinth is intense!! David Bowie might be the cause
View attachment 355379

Sent from my Pixel 3 XL using Tapatalk

 

[nicklulu]

Not available in the USA that's just yet another thing that Europe gets the US is f***** over on

Sent from my Pixel 3 XL using Tapatalk

It "was" easily available from Mountune UK direct till they changed their policy recently.

You can still get it from resellers in the UK or get a mail forwarder.

 

[FU3LD]

Not available in the USA that's just yet another thing that Europe gets the US is f***** over on

Sent from my Pixel 3 XL using Tapatalk

Thanks to @MbbRS and @Si2RS for mentioning: https://j-w-racing.co.uk/ , they ship to the US and I just placed my order with them. Hope that helps.

 

[Ankah]

Thank you

Thanks to @MbbRS and @Si2RS for mentioning: https://j-w-racing.co.uk/ , they ship to the US and I just placed my order with them. Hope that helps.

Sent from my Pixel 3 XL using Tapatalk

 

[nicklulu]

Just adding this new option I found:

HEL Oil Catch Can – Mk3 Focus RS Club

mk3focusrs.club

Its also in Ebay:

Pardon our interruption...

I like the cans and hoses...... the breather plate that comes with it is ok.

 

[gbassrace]

That kit and plate doesn't look much different from the Radium setup except for the hoses which do not need to be that heavy duty for the purpose.

 

[FU3LD]

has anyone installed the radium uprated pcv valve and pcv catch can with the mountune UK RS specific breather plate (v2 / labyrinth-style)?

If so, what did you do/use to block off the OEM pcv valve location on the top of the breather plate?