I can not recommend Tasca automotive highly enough. They have gotten me parts, part numbers, etc. faster than I could believe based on others posts. They are amazing, any time I have ordered and it's not making sense to them or or is missing something, they always call, walk through it and confirm, or correct. Superb customer service.

Part Number	Part Name	Price	Quantity	Total
G1FZ-6P013-A	Shield - Engine Compartment Sp	$226.71	1	$226.71
G1FZ-8310-C	Deflector - Air	$20.79	1	$20.79
G1FZ-8310-B	Deflector - Air	$11.77	2	$23.54
-W711712-S300	End Cap Rivet	$0.80	6	$4.80

Subtotal:

$275.8

 

I can not recommend Tasca automotive highly enough. They have gotten me parts, part numbers, etc. faster than I could believe based on others posts. They are amazing, any time I have ordered and it's not making sense to them or or is missing something, they always call, walk through it and confirm, or correct. Superb customer service.

Part Number	Part Name	Price	Quantity	Total
G1FZ-6P013-A	Shield - Engine Compartment Sp	$226.71	1	$226.71
G1FZ-8310-C	Deflector - Air	$20.79	1	$20.79
G1FZ-8310-B	Deflector - Air	$11.77	2	$23.54
-W711712-S300	End Cap Rivet	$0.80	6	$4.80

Subtotal:

$275.8

@justcor I received my parts today. Just to be clear the above are the fiber tray, the big middle deflector (2 pieces and I ordered a spare as my original broke and I figured might as well be able to fix the new one if it happens again) on the back of the NACA duct and then anchors. There are other parts needed to completely replace the tray. I was going to ty to scavenge the second deflector for the other big NACA duct from my existing tray. If you want everything new, call Tasca. They will help you. Let me know if you want pics of what each item represents and I will post to this thread.

 

Thanks exactly what I needed.

 

What is the front one called? Mine came loose as flew off on the highway ��

 

I believe this is the front one close up under the bumper.

G1EZ-17808-A - Front Undertray, Stone Deflector

What is the front one called? Mine came loose as flew off on the highway

 

A full aluminum one is only a few bucks more expensive....

 

From some guy on FB? Point me to an actual company with a proper website. I don't mind buying from a guy in his garage but if your selling on FB and don't have a website you don't get my money.

 

Just as an update also. In speaking with the Canadian guy, he offers different ones now:

"I have a few styles available
-solid plate with slots and air dams in stock location $150
-oil access doors with slots for air flow $250
-naca ducted solid plate with stock location air diverters $350
-oil access with naca ducts. $450"

These are Canadian prices and of course add shipping. Not sure on forum rules but if someone is interested there is another thread that says how to get in touch with him. Otherwise PM me.

 

Where is the Canadian guy and the Facebook guy?

 

I bought one from same guy I assume, in Saskatchewan, he is on FB but does have an actual fabricating business. It isn't fancy but definitely does the job. I bought the one with oil access ducts.

 

Thanks for the detailed part numbers.

 

So here is what I did. The relief patterns look like there is supposed to be a flap, not a hole. So I cut it out that way. And it is perfect. You can fit your hand into the access flap to release the clip but otherwise the little flap seals closed with the tongue holding it in place.

 

W711712-S300 "End cap rivet" is the plastic push pins for the undertray?

 

No, they are for attaching the clip to the big NACA duct. See the third pic I posted.

These plastic rivet things are actually a serious PIA to figure out partb numbers and sizes. The web sites are useless pretty much. I ended up buying a bunch of generic sets from Amazon trying to get sets that looked like they included some matching parts to our cars. One kit had the outer push pins for the tray. But there are other versions and sizes all over the car. Some screw in. Some push in. It's annoying. They break super easily and you would think would be easy to get for replacement. Like replace at every other removal, etc. But no.

 

Thank you for the clarification.

 

I ordered from my dealer, they said a week. The clip for the cross bar is the wait. But really, who leaves a freaking wedged 4x4 block on the road.

 

Dyolfknip74,
Could pm me with the link to this outfit for undertrays/ skid plates.
Regards,
Bob
Maasshorowitz@gmail.com

 

Hi, my skidplate just broke today.

Do you have the info of the Canadian guy since i live in Canada?
Thanks

 

This is how you would reach him when I got mine:

Dorian Gilles
mailto:sales@allwynnsteel.com
tel: (306)781-2226

But he now seems to run under the DMGFab brand, he is on instagram I dont think he has a site of his own. Skidplates now available through raptor racing in Canada, I bought a ducted one for summer just before the holidays:

https://raptorracing.ca/dmgfab