I have bought a set of replacement LEDs from SuperBrightLEDs as suggested in this thread: http://www.focusrs.org/forum/32-focus-rs-lighting/55385-led-bulbs-budget.html. Since my RS hyperflashes with these bulbs installed, I also bought a load resistor kit. However, it looks like I would need to tap into the wiring harness that connects to the headlight since none of the wiring is exposed on the outside of the headlight (unlike the tail lights). All the wiring for each bulb socket are on the inside of the headlight housing and it does not appear to be feasible to install the load resistors inside the headlights without disassembling the headlight.
![Image]()
Has anyone been able to track down the wiring diagram for the headlight? Also, does anyone happen to know what kind of connector is used for the headlights? Another idea I’m considering is that if I can buy the connectors, I can make an extension of the harness that has the load resistors tapped to avoid modifying the factory wiring harness entirely.
![Image]()
Has anyone been able to track down the wiring diagram for the headlight? Also, does anyone happen to know what kind of connector is used for the headlights? Another idea I’m considering is that if I can buy the connectors, I can make an extension of the harness that has the load resistors tapped to avoid modifying the factory wiring harness entirely.
