Ford Focus RS Forum banner

Shift plate with heavier or lighter knob??

2K views 7 replies 6 participants last post by  Madokami 
Not my picture, but this is the shift knob I have. Raceseng Ashiko with a JRB shift arm and solid metal bushings on the shift cable ends, cable bracket, and shifter base. I had occasional issues shifting into second gear until I upgraded the rear motor mount, now it's smooth and precise every time. The OE shift knob didn't have this problem, but was notchy, so you can upgrade everything else before getting a heavy shifter and see if you like it, then toss the shifter in if you don't like the notch.

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top