Ford Focus RS Forum banner
1 - 20 of 44 Posts

·
Registered
Joined
·
320 Posts
Discussion Starter · #1 · (Edited)
Edit: 8/3 added camber plates
Edit: 8/4 changed pick up location, added photos, removed Öhlins-specific GC camber plates kit (they come with the Öhlins),
Edit: 8/4 added AP Racing, spacer, Euro OEM roof rack, Cobb Accessport V3 w/Stratified, and Mountune Full High Flow Intake (special edition, red)
Edit: 8/7 marked wheels, coils, brace, diffuser, and intake sold
Edit: 8/8 removed AP Racing brakes from listing, created another thread for them
Edit: 8/14 APv3 sold



Selling the RS, thought I'd have it forever but have an opportunity to get into something more rare and with better aftermarket support. Up for sale are some parts below: photos can come later, if required

--
A. Item: Rays Engineering Volk Racing TE37 Saga, 18x9 +38 w/Nankang CR-S 255/35R18
B. Condition: 30k mi, a few track days, paint chipping at the center cap edges from tire installation machine on all wheels, one 3" curb rash on a single wheel, no bends, no other damage, Rays valve stems, tires have 75% and have not seen the track. Comes with tire bags and wheel face protectors.
C. Price: SOLD
D. Location: SF, pick up only please


--
A. Item: Öhlins R&T
B. Condition: 30k mi, a few track days, I've rebuilt them once using Brenner (SoCal) - he charges about $900 and has a 2wk turnaround time. According to Öhlins they should be rebuilt every 20k but honestly didn't think they needed rebuilding but did it anyway, felt brand new before and after rebuild. Comes with GC camber plates!
C. Price: SOLD
D. Location: pick up in SF, can ship for $50


--
A. Item: Verus Rear Diffuser
B. Condition: used, comes with all brackets and mounting screws/spacers, some scratches from road debris and steep driveways, shape and structural integrity is 100%
C. Price: SOLD
D. Location: pick up in SF, pick up only please


--
A. Item: Shimmer Titanium Rear Subframe Brace w/ Removable RDU Kick (custom rivnuts)
B. Condition: like new
C. Price: SOLD
D. Location: Pick up in SF, can ship for $50


--
A. Item: Ground Control camber plates, stock struts/springs
B. Condition: new
C. Price: $250
D. Location: Pick up in SF, can ship for $20


--
A. Item: Vorshlag camber plates, for Öhlins R&T
B. Condition: 5miles, installed and then removed, basically new
C. Price: $350
D. Location: Pick up in SF, can ship for $20


--
A. Item: H&R spacers, pair, 10mm
B. Condition: 20k mi, no track
C. Price: $50
D. Location: Pick up in SF, can ship for $20


--
A. Item: H&R Spacers, pair, 15mm
B. Condition: new, 0mi
C. Price: $50
D. Location: Pick up in SF, can ship for $20


--
A. Item: Eibach Spacer Pro-Kit, 15mm, set of 4 (bolt-on, work with RS forged wheels and TE37, basically any wheel with relief cuts, extended studs not required!)
B. Condition: 30k mi, no track
C. Price: $100
D. Location: Pick up in SF, can ship for $20


--
A. Item: Whiteline springs, for stock dampers
B. Condition: 10k mi
C. Price: $100
D. Location: Pick up in SF, can ship for $50


--
A. Item: Ford Europe OEM roof rack
B. Condition: new, 0mi
C. Price: $350
D. Location: Pick up in SF, can ship for $50


--
A. Item: COBB Accessport V3, w/Stratified 91/E30 maps
B. Condition: like new
C. Price: SOLD
D. Location: Pick up in SF, can ship for $20


--
A. Item: Mountune Full High Flow Intake, Special Edition, Red
B. Condition: like new, all silicone couplings and clamps included
C. Price: SOLD
D. Location: Pick up in SF, can ship for $30


--
A. Item: Work T7R, 18x9.5" +38
B. Condition: used 10k mi, each one has a slight bend in the lip, one fell over on it's face while in the garage (doh!) no tires mounted, stored in original boxes
C. Price: $1000
D. Location: Pick up in SF only
 

·
Premium Member
Joined
·
946 Posts
Let me know if you change your mind on shipping the rear diffuser.

Ready to buy been looking for a deal on one of those in the classifieds for a while now.

Thanks!
 

·
Registered
Joined
·
320 Posts
Discussion Starter · #16 ·
Rear subframe brace w/RDU kick. I really shouldn't be selling this at a discount. I had Shimmer add in the rivnuts and Ti bolts to allow the kick to be removed. Never had to do it, but it's nice to have there. Future owner will enjoy this, you can see it from the back when installed. 👌
 

Attachments

·
Registered
Joined
·
320 Posts
Discussion Starter · #19 ·
Wheels pics, showing the small curb and the chips at the centerbore from tire mounting. As you can see there are still little nubs on the tires showing that they haven't been tracked. The outside are actually 100% and I listed the tires at 75% to account for the wear on the insides (I run track alignment on the street, and never had the chance to track the tires so I would say wear is about 75% only on the insides). Comes with tire bags and wheel face protectors.
 

Attachments

1 - 20 of 44 Posts
Top