Ford Focus RS Forum banner
21 - 21 of 21 Posts

· Registered
3,722 Posts
You have Ohlins right? Ohlins with the Vorshlag plates is the ideal setup for not having to modify the tower. This is because you've eliminated the two reasons to cut the tower -

  1. hard to access camber/caster screws
  2. comp/rebound adjustment shafts sticking up above the narrow tower hole that will make contact with the hole when making aggressive camber caster settings.
Correct, Ohlins w/vorshlag plates, although I did run KW DDCs with GC plates too that didn't require modifying anything
21 - 21 of 21 Posts