Ford Focus RS Forum banner
101 - 114 of 114 Posts

·
Registered
Joined
·
15 Posts
I built this forged engine 2.3 an excellent result 400 hp for my ST
RS stock turbo,head RS
I have already built 4 forged engines for my friends

I had big plans make 500+ i bought a big turbo (G25-660) Aux Fuel 4 Port I did not install
but plans have changed i will sell the ST
I have a new plan Audi S3 2018 DSG 500+


352327
352328
352329
352330
352331
352332
Hi
 

·
Registered
Joined
·
2 Posts
I built this forged engine 2.3 an excellent result 400 hp for my ST
RS stock turbo,head RS
I have already built 4 forged engines for my friends

I had big plans make 500+ i bought a big turbo (G25-660) Aux Fuel 4 Port I did not install
but plans have changed i will sell the ST
I have a new plan Audi S3 2018 DSG 500+


View attachment 352327 View attachment 352328 View attachment 352329 View attachment 352330 View attachment 352331 View attachment 352332 Hi
what Did you need to change to run the rs turbo and head?
 

·
Registered
Joined
·
2 Posts
Hi
close one oil drain in block 2.0
head gasket from RS
head from RS
turbo from RS
exhaust camshaft from ST
High pressure fuel pump from RS
small changes to the cooling system
Wow thanks for the quick answer. Could you still use your st charge pipe and intake tube? And what about a down pipe and exhaust?
 

·
Registered
Joined
·
15 Posts
Hi
Yes you still can use your st charge pipe and intake tube
you have to change one silicone for charge pipe
the downpipe must be used from RS
exhaust use from ST

unfortunately I have already stop the Ford focus ST project
Ford there is too little potential for me

new project
Audi S3 8V 500+
Audi A4 B9 370

DSG this is the future !!
 

·
Registered
Joined
·
3 Posts
Hi
Yes you still can use your st charge pipe and intake tube
you have to change one silicone for charge pipe
the downpipe must be used from RS
exhaust use from ST

unfortunately I have already stop the Ford focus ST project
Ford there is too little potential for me

new project
Audi S3 8V 500+
Audi A4 B9 370

DSG this is the future !!
Hi
close one oil drain in block 2.0
head gasket from RS
head from RS
turbo from RS
exhaust camshaft from ST
High pressure fuel pump from RS
small changes to the cooling system
Greetings. Is there any work to be done with crankshaft to bolt in the st block?
 

·
Registered
Joined
·
2,163 Posts
Is the ST 2.0 block considered 1st generation 2.0 ecoboost or 2nd generation 2.0 ecoboost? View attachment 355030
It tells you in the text in the pic what is classified as 2nd generation??
It clearly says " the engine was significantly redeveloped in 2015" that to me would be classed as 2nd generation?
 
101 - 114 of 114 Posts
Top