Ford Focus RS Forum banner

Search results

1-20 of 454 Results
Advanced Search
  1. PTP Turbo Blankets Group Buy!

    Focus RS Performance
    any pics? 😀
  2. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    lol just was bored and decided to do this while i wait for the new tune map
  3. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    I hate the rear plate holder. It flexes too much. I know someone was selling metal bracket. I decided to.experiment and the final product is much more sturdy. used epoxy glue from autozone
  4. PTP Turbo Blankets Group Buy!

    Focus RS Performance
    anyone can share a pic of this installed on the pte turbo?
  5. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    Thanks man. Yes that tube is an issue since i was on stock engine. Always have something between the 2 to absorb noise. Afraid to bend and snap it. This time around i cut a small piece of silicon mat that is used under hot pots and put it between the 2 pipes. But will probably push it harder...
  6. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    did some data logs to send to alex at stratified auto. Car pulls pretty strong and boost limit set to 20 psi and revs to 6750. later to 7500 as I was told a while back by esslinger i am good for 7500 on my cams
  7. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    no reason, it was still good but I only had a tune and on gasoline no e85. I switched so that I would not have to change again later.
  8. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    No issues, not even ecu picked up on position sensor being off. but it feel stronger now being 100% correct. Even if i have it way off valve train is safe since the chain and cam position relative to piistons already is set and locked in on the keyed crank. if it was way off it would not...
  9. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    No issues, not even ecu picked up on position sensor being off. but it feel stronger now being 100% correct. Even if i have it way off valve train is safe since the chain and cam position relative to piistons already is set and locked in on the keyed crank. if it was way off it would not...
  10. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    runs better but noise is the same. 😥 also removed oil filter and used oem focus rs motorcraft filter..... and removed the sandwich plate for the mishimoto oil cooler. started it and same noise when I rev slowly up and get to 1800 2500 it does the rattle noise. after that nothing and if i rev...
  11. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    I believe it was off. oops. I had aligned timing by putting a bolt through pulley aligning hole with chain cover threaded hole. today I inserted the tdc timing pin in engine. the hole does not align :oops::oops: so now I.realigned the position sensor using the alignment tool. apparently...
  12. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    still have engine noise. tube cleared.
  13. The Tesla Cybertruck Pickup Truck Is Here and It's Wacky

    Off-Topic
    the glass breaking was a stunt I believe to get more free publicity.
  14. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    by the way, regarding the alignment tool. i heard back from xtreme. Their kits now come with a metal alignment tool and right size. i contacted them to at least add some install tips lol but looks like since sometime last year or early this year they no longer have the plastic tool
  15. MexRS - Forged Engine + PTE Turbo - Round Two!

    Focus RS Performance
    might need to do.that but I think if I make a dent in it, problem solved. since I have it marked from where paint came off the charge pipe. transmission is up with new slave cylinder and new seal on the output shaft. fingers crossed cause I doubt it.was the main engine seal lol. had to do...
  16. twin disk clutch

    Focus RS Performance
    me too! told xtreme they should add to.the install guide lol
  17. twin disk clutch

    Focus RS Performance
    worked like a charm.
  18. ptu oil ?

    Focus RS Discussions
    wonder if anything from autozone is.compatible
  19. ptu oil ?

    Focus RS Discussions
    I had it in a bad position... forgot.about the vent. leaked out unknown amount. will drain it but use what oil?
  20. twin disk clutch

    Focus RS Performance
    Any ideas how to get transmission mounted back. it goes in almost all the way and i have about less than 1/4 inch. i used the alignment tool for the twindisk. aligning the center is only possible to do visually had the issue with engine on the table and that time i semi tightened preassure...
1-20 of 454 Results
Top