The All in One Lug nuts for the FoRS thread
This is a discussion on The All in One Lug nuts for the FoRS thread within the Focus RS Wheels and Tires forums, part of the Focus RS Garage category; Anyone know where I could get lug nuts like the M-1012-RSA from Ford racing . I have them on my 2016 RS with the MK2 ...
04-20-2019, 12:11 PM
Anyone know where I could get lug nuts like the M-1012-RSA from Ford racing. I have them on my 2016 RS with the MK2 RS Ford Racing wheels. But they seem a little over-sized in the shoulder area. They also have those thin metal sleeves that dent and strip way too easy. I was given these specs from Ford Racing:
But having a hell of a time finding something aftermarket I can use instead.
12mm x 1.5 pitch.
60 degree shoulder.
Diameter of the shoulder at the top of the taper is 25.9mm.
It requires a 19mm socket.
Thanks for any help.
04-20-2019, 10:06 PM
Looking at Gorilla lugs to replace my OEM ones...I have a set of chrome spline ones that I use on my track wheels (same as the first link, just chrome), but I'm thinking of ordering a set of black ones. So far they have held up fine, but I'm curious if anyone has any other feedback on them. I know Gorilla also make the forged ones (second link), which I realize are probably better for the track. I don't really like they way they "stick out", and if the normal splined ones are ok then I'd rather get those because they are cheaper. Does anyone have any input/feedback between the two sets below for track use??
As a side note, I don't want open-ended
04-23-2019, 06:51 PM
I had open lugs on my Subaru for years and never had a problem, but I used the OEM closed lugs for winter.
I just picked up a set of Project Kics when I found out 3 of the lugs were "swollen" on the wheel that I had tire patch installed on by the dealer.
Please excuse the dirty wheel, tire and brakes.
04-23-2019, 11:44 PM
I have those black ones (first link) and they have held up great so far. I’ve done plenty of tire changes and never bent a lug, and the finish is still good. I had been using them with my aftermarket wheels, but after cursing at the Ford lugs for so long I am thinking of using them Gorilla ones with the forged Ford wheels also.
Originally Posted by Carcrzy
Current: 2017 Frozen White Focus RS, 2001 Ranger XLT 4x4, 2015 Sienna AWD
04-29-2019, 10:47 PM
I have the gorilla lugs. Does anyone know if they sell the socket with a 1/2" socket head (rather than needing to connect it to a socket first)? Trying to reduce the tools and pieces to streamline tire changes.
I also got a 100 lbft torque stick to avoid the manual torque finishing step, haven't tried it yet.
By VividRacing in forum Vivid Racing
Last Post: 11-21-2017, 02:37 PM
Search tags for this page
2017 focus rs locking lug nut
2017 focus rs lug nut size
focus rs blue
focus rs lug nut mishimoto
focus rs lug nut size
focus rs lug nuts
focus rs lugnuts amazon
focus rs wheel nuts nitrous blue
focus st mk3 lug nuts
kics black kyokugen focus rs
lugnut removal on a 2014 focus
Click on a term to search our site for related topics.